Complete Plastic Recycling Plant w/ Extruder, Metal Detector, Densifier, Etc
| Loeb # | 67762 | Model | RM63T |
|---|---|---|---|
| OEM | Erema Engineering Recycling | ||
| Year | 2002 | Serial | P01115 |
| Electrical | Location | Illinois | |
| Condition | As is | Size | 0.00 |
| Lease for only | 4,921.63 / mo. | Rent for only | N/A |
Erema Model RM63T Pelletizing Line Consisting Of The Following: 24 in Wide x Approximately 20 ft Inclined Belt Conveyor Including Metal Detector. Belt Conveyor Feeds Approximately 36 in O.D. x 48 in Deep Densifier Belt Driven By a 37kw Motor. Has Tangentially Fed Extruder From Densifier With 63mm Screw, 23/1 L/D, Electrically Heated, Air Cooled, Non Vented Barrel, Driven By a 42kw Motor Approximately 56HP. Motor Is 480 volt AC Input With Siemens Variable Frequency Drive. Extruder Is Equipped With Model SW2 104 RTF Auto Back Flush Screen Changer, New 2002. Includes Erema Water Ring Pelletizer, Model #HDGHG80/1500, 9 in x Approximately 3 ft Long Water/Pellet Take-Away And Approximately 12 in Wide x 36 ft Vibrating Classifier For Water/Pellet Separation. Classified Discharge Is Into Erema Spin Dryer, With Blower Discharge And Cyclone Receiver For Loading Gaylord Boxes. Line Rated At Approximately 250-350 Lbs. Per Hour Depending On The Product. Previously Used On Polyethylene Foam at 325-350 Lbs. Per Hour
Equipment Gallery
Have Inventory to Purchase or Sell?
Looking to purchase equipment? Have one of these to sell?
Click Here