Denver Dual Screw Holoflite 316L S/S Hot Oil Indirect Heat Thermal Processor Dryer
| Loeb # | 71686 | Model | D24206GED |
|---|---|---|---|
| OEM | Denver Equipment Co | ||
| Year | 1982 | Serial | |
| Electrical | Location | Illinois | |
| Condition | As is | Size | 0.00 |
| Lease for only | 4,921.63 / mo. | Rent for only | N/A |
Denver Model D24206GED Dual Screw Holoflite 316L S/S Hot Oil Indirect Heat Thermal Processor Dryer Conveyor. 24 in screw diameter, 20 ft Long screws, C/S Jacket, Screw working pressure 150 PSI at 650 degreed F. Hyd. 225#, ASME, N.Bd. Trough working pressure Atm#/Low positive or negative pressure. jacket working pressure 30 PSI at 650 degrees F, Hyd. 45#. ASME. N.Bd. Fluid medium Hot Oil, 5HP, 3/60/460V, Fr 184TC, 1800RPM, C face, TEFC, NEMA B. Connects to fixed ratio gearbox, Falk type 1120 PC4, concentric reducer, 985.3:1 ratio. Screw RPM 0.355-1.42 approx. Prior service Copper cake at 140 PCF. 7004 PPH Feed at 80 Deg F, Discharge approx. 6093 PPH at 220 deg F. Zinc Sludge, 5TPH 40% H2O in/5% out and Activated Charcoal. Performance varies dependent on RPM, product type, moisture content/evaporation rate/temp. Approx 2.2mm btu/hr heat load. Approx. 546SF transfer area. C/S vapor dome. Product feed opening, flanged, approx. 43 in wide x 21 in long at drive end. Discharge approx.43 in wide x 21 in long , flanged at opposite end underneath. 3 in Johnson type rotary joints.
Have Inventory to Purchase or Sell?
Looking to purchase equipment? Have one of these to sell?
Click Here