Bepex Model TLS2013 20 in Dia X 156 in L S/S Clam Shell Turbulizer
| Loeb # | 53154-004 | Model | TCS2013 |
|---|---|---|---|
| OEM | Bepex International | ||
| Year | Serial | TCS90000601 | |
| Electrical | 3/460/60 | Location | Illinois |
| Condition | As is | Size | 0.00 |
| Lease for only | 637.99 / mo. | Rent for only | N/A |
20in. Dia X 156in. L All 304 S/S Bepex Mdl TLS-20-13 Single Bolt Clam Shell Jacketed Turbulizer High Intensity Impact Continuous Mixer Or Coater With 15 Hp Drive & Air Seals S/N TCS90000601. Rated 50 psi at -20 to 300 degrees F. Approximately 9 in diameter shaft with With (4) Rows Of Adj Pitch Paddles. Approx. Overall Size:16ft. L X 3ft. W X 3ft. H Last Used On A Food Product As A Preconditioner Clam Shell Bolted Body Design W/ Wheels To Slide A Side Of The Body Open Infeed: 8in. Dia Flange, 3in. Flange Inlet On Discharge End. (5)Steam Ports (3) 2.5in. Threaded Bottom Ports With Caps Discharge: 4in. X 8in. Flange Discharge Offcenter Max Cap Intensive Mix M 3 /H Approx: 12 Low Energy Dispersion M 3 /H Approx: 42 Slurry Mixing M 3 /H Approx: 42 Approx Tip Velocity: 4-62 15 Hp 3/460/60, 1750 Rpm, Sew Eurodrive Type R143z S/O:8500439430, 21.54 Ratio, 88,500 Lbs In Torque With Pully Ratio Of Approx 2 The Turbulizer Mixer / Coater Is Ideal For High Capacity Mixing For Producing Homogeneous, Lump Free Products. High Capacity Machine Requiring Minimal Floor Space Or Head Room.Self-cleaning/Emptying Rotor With Minimal Residue In The Machine. Low Quantity Of Product In The Turbulizer And Short Residence Time(1-40 Sec) Provide Efficient Use Of Installed Power. Thin Layer Coating, Lump-free Product. Outboard Bearings Never In Contact With Product. Fully Adjustable Paddles Allow For Flexibility In Process Design.
Equipment Gallery
Have Inventory to Purchase or Sell?
Looking to purchase equipment? Have one of these to sell?
Click Here