Brenton Model 90 Tray Erector/packer w/ Nordson 3700v Hot Melt Glue System
| Loeb # | 65409 | Model | 90 |
|---|---|---|---|
| OEM | Brenton Engineering Co | ||
| Year | 2003 | Serial | |
| Electrical | Location | Illinois | |
| Condition | As is | Size | 45.00 |
| Lease for only | 1,075.47 / mo. | Rent for only | N/A |
Brenton tray erector/packer, model 90. W/ Servo Oscillating Infeed, Side Entry Tray Magazine Loader And Nordson 3700v Hot Melt Glue System S/N 3096 (2003) Approx. Overall Size: 40ft. L X 6ft. W X 7ft. H System Can Be Easily Retrofited For Your Container(S) And Tray(S) Current Tray Sizes: 7.59in. To 10.87in. W, 11in. To 15.3in. L, 3.99 To 6.87in. H Lane Divider: 1:4 Servo W/ Metering Belts, Wave Guide Belts Approx Infeed Height: 47in. Infeed Speed: Up To 480 Bpm Current Container Size: Pet Bottles, 340 Cc To 1200 Cc (11.49 Oz To 40.56) Packing Pattern: 3 X 1 X 4 Tray Blank Feeder: Side Entry Autoloader, Vertical Blank Feed Magazine Feed: Vacuum Glue System: Nordson 3700v Hot Melt System Flap Closure: Rotary Tuckers And Plows Product Loader: Overhead Sweep Bar Air Required: 80 Psi @ 16 Cfm Electrical: 3 Ph 460 Volt 100 Amp Tray Blanks Are Stacked Vertically In A Low Level Pre Load Station With A Delrin Chain Belt Conveyor Feed. A Vacuum Pick Head Places Each Flat Onto An Inclined Lug Chain Conveyor. The Collated Pattern Of Containers Is Then Positioned With The Tray Blank Feed Underneath.The Minor Flaps Are Tuck By A Rotary Disc On Each Side And The Major Flaps Are Folded Upright By The Guide Rails With Glue Applied. Compression Is Maintained By Side Belts.
Have Inventory to Purchase or Sell?
Looking to purchase equipment? Have one of these to sell?
Click Here