Cozzini 50 HP Model AR701MC S/S 7in Dia Emulsion Mill
| Loeb # | 74705 | Model | AR701MC |
|---|---|---|---|
| OEM | Cozzini | ||
| Year | Serial | 0174 | |
| Electrical | 3/460/60 | Location | LOEB East Bldg #4 East Side |
| Condition | As is | Size | 50.00 |
| Lease for only | 625.23 / mo. | Rent for only | N/A |
Cozzini Model AR701MC 7 inch Diameter S/S Emulsion Mill Reduction System. Capacity of Approx. 20,000 (Coarse) to 10,000 (Fine) Pounds Per Hour. 50 HP. Available Hole Plate Sizes 1.0 mm to 9.9 mm. 2 1/2 in Diameter Sanitary Threaded Inlet. 3 in Diameter Sanitary Threaded Outlet. Available Holeplate Sizes From 1.0 mm to 9.9 mm. The Cutting Chamber Reduced the Products to the Desired Particle Size and Temperature. The Multi Cutting Chamber Can be Used with a Single Plate and Knife or Two Plates and Knives. As Meat Passes Through the Primary Knife Holder and Reduction Plate, the Knife Holder Cuts the Particles Against the Surface of the Plate. The Cut Particles Then Pass Through The Holes on the Primary Plate Toward The Secondary Knife Holder. The Particles Are Reduced Once Again and Forced Through the Smaller Holes on the Secondary Reduction Plate and Discharged. All S/S with Control Panel and Digital Timers. 460 V, 3 Ph, 60 Hz.
Equipment Gallery
Have Inventory to Purchase or Sell?
Looking to purchase equipment? Have one of these to sell?
Click Here