Extrutech Twin shaft 16in Dia x 60in L S/S direct steam Preconditioner/ feeder
| Loeb # | 63538 | Model | DCC16X60 |
|---|---|---|---|
| OEM | Extru Tech | ||
| Year | Serial | 98B0023 | |
| Electrical | 3/230/460/60 | Location | M-05 |
| Condition | As is | Size | 5.00 |
| Lease for only | 763.85 / mo. | Rent for only | N/A |
ExtruTech twin shaft wet product feeder/conditioner with bottom direct steam injection at multiple inlets and with adjustable product retension time. Mdl DCC16X60, rectangular product infeed, approx12in x 18in flange, another 12in x 18in with counterweighted cover. Steam manifold, 8 in x12 in end bottom discharge, approx 5 HP motor and gear reducer, 230/460 wired 460 volt, 12.15 cu ft total volume capacity, 9.78 cu ft max working capacity( based on dry feed rates with density of 30 lbs/cu ft). Up to 30000 lb/hr capacity depending on requied processing time, The dual shaft conditioning cylinder enables the operator to incorporate a combination of low steam pressure injected at (6) inlets and adjustable product retention time. This provides the system operator with a whole new level of product quality control. The Extru Tech dual shaft conditioning cylinder will enable you to meet these increasing demands as well as provide the benifits of; High liquid addition, Lo energy consumption, Variable retension times, Low coefficient of variation, Starch gelatination levels attainable between 40% and 45%, Temperature over 90 deg C, Human food hygeienic grade equipment.
http://www.youtube.com/watch?v=vUetCiaSa1s
Equipment Gallery
Have Inventory to Purchase or Sell?
Looking to purchase equipment? Have one of these to sell?
Click Here