HAAS Model SWAK 64 Wafer Line - Production Capacity : approximately 1800-2000 Kg/ 8 Hours.64 plates VAPOF-gas heating wafer line oven FABR-Nr. 7477 / Volt : 3 x 380 x 50 HX x 7 KW. Waste scraper at front end , additional upgrading of flame safety control/explosion proof systemdesigned and installed by GCD International Pty. Ltd. - Australia. Oven overall dimensions : 13.6M L x 1.75M W x 2.03M Self supporting baking plate size: 350 x 480mm x 64 sets. Engraving top plate : KARO 3 x 3mm x 0.8mm/90 Deg (straight line pattern). Engraving bottom plate KARO 3 x 3mm x 0.8mm/45 Deg (cross line pattern). brand new fabricated Stainless Steel insulated oven doors and cladding HAAS TM180+ATP batter mixer batter mixing 180 liter capacity , with agitator, 2 batter pumps, water dosing unit , vibrating screen and drain valve. C/W electrical control panel , photo sensor , work platform and ladder. SS batter pipeline Dia 25mm. HAAS TBK 2.0 -Arcway cooler 2 meter high, for cooling wafer sheets up to 350 x 480mm HAAS WSTM - Automatic cream spreader. Automatic spreading of wafer sheets up to 350 x 480mm, belt width 550mm with spiral tracking & press rollers with 2 cream spreading heads. HAAS TCM 125-turbo cream mixer,2 sets Capacity 125 liter , double wall body, electrical control panel. FESTO pnuematic system. Hydraulic lifter for ingredient handling. HAAS WK60+KA-Book cooler/cooling press Continuos cooling of books of creamed wafers. Cooling capacity : 25000 kcal including cooling unit KAL /Freon R22, 10HP Compressor. HAAS KB90 - 90 Degree transfer conveyor c/w motor,2 units Chimney c/w Blower Scope of Rebuild : all above equipment 100% fully stripped-down, with all detected wear & tear parts/changed/replaced prior to final re-assembly, electrically & mechanically tested in excellent running condition, with actual baking test-runs conducted with very good performance result. line excludes : HAAS wafer cutter.