HTST System with AGC AR51 HE, Tube Loop Pasteurizer, Balance Tank and more
| Loeb # | 70570 | Model | AR51 |
|---|---|---|---|
| OEM | A G C Engineering | ||
| Year | 2001 | Serial | 01164 |
| Electrical | Location | LOEB East Bldg #2 East Side | |
| Condition | As is | Size | 940.00 |
| Lease for only | 1,186.66 / mo. | Rent for only | N/A |
Complete HTST System with AGC Model AR51 Approx 940 Sq Ft Stainless Steel Plate and Frame Heat Exchanger (S/N 01164, Year 2001). 14.5 in W x 60 in H S/ S Plates, Three Sections with Approx 35, 48 and 74 Plated in Each Respective Section, (2) S/S Dividers, (4) 4 in Diameter Tri-Clamp Inlets and Outlets on Each End, (2) 2.5 in Diameter Tri-Clamp Inlets/Outlets on Each Side of Divider Terminals, Manual Closer. 3 in Diameter x 9 ft Long S/S (5) Pass Single Tube Loop Pasteurizer. (9) 3 in Diameter x 9 ft L Tubes. 2 in Diameter Tri-Clamp Inlet and Outlet. 67 in Infeed Height, 29 in Discharge Height on S/S Frame. S/S Balance Tank, 45 in ID x 18 in High in Center, 10 in High Near Sides, (2) 1.3 Hinged Covers, (3) 2.5 in Diameter Tri-Clamp Top Inlets, (1) 3 in Diameter Tri-Clamp Top Inlet, (1) 2 in Diameter Tri-Clamp Top Inlet, 2.5 in Diameter Tri-Clamp Side Inlet, (2) in Diameter Side Bottom Outlet, (3) 20 in H S/S Legs. 10 HP S/S Centrifugal Pump with 2.5 in Diameter Tri-Clamp Inlet and 2 in Diameter Tri-Clamp Outlet, 208-230/460 V, 3 Ph, 60 Hz, 29.3/14.7 Amp, Hot Water Set with 50 in L x 8.5 in Diameter S/S Shell and Tube Heat Exchanger with 3 Inch Diameter Inlets/Outlet and Steam Control Valve. Partlow Model MRC7000 Chart Recorder with S/S Cabinet.
Equipment Gallery
Have Inventory to Purchase or Sell?
Looking to purchase equipment? Have one of these to sell?
Click Here